Home   ·   Company Overview   ·  
Contact Us   ·   Customer Service

  
Personal Products  
·  Energy Saving Products  ·  Lawn & Garden Products  ·  Water Filters & Softeners  ·  Air Filters



        Energy Savings-VendingMiser®


Join the thousands of corporations, colleges and universities, school districts, government facilities, retail stores and hospitality properties that conserve energy cost and preserve the environment with our line of energy control products for cold beverage and snack vending machines and other electronic devices.

VendingMiser® incorporates innovative energy-saving technology into a small plug-and-play device that installs in minutes, either on the wall or on the vending machine. Maintenance savings is generated through reduced running time of vendor components, estimated at $40 - $80 per year, per machine. Energy consumption is reduced an average of 46% -- typically $150 per machine annually.


View Brochure
View BrochureVM2
How It Works
Savings Chart1
Savings Chart2



VendingMiser® VM150


VendingMiser® VM150 Indoor Wall Mount w/ Occupancy Sensor

VendingMiser VM150 with PIR (Passive Infra-Red) Occupancy Sensor.  Wall-mounted for indoor use.  Use in locations where vending machine placements are not subject to change.  Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.

Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket


 

 




VendingMiser® VM151


VendingMiser® VM151 Indoor Wall Mount w/ 10' Repeater Cable

VendingMiser VM151 Controller with internal Sensor Repeater.  Wall mount for indoor use.  Use as secondary unit with a VendingMiser VM150.  Includes a 10' repeater cable to connect to a VM150.  Up to three VM151 units can be connected to a VM150 for a total of four units controlled by one sensor.

Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable








VendingMiser® VM160


VendingMiser® VM160 Outdoor Wall Mount  
With Occupancy Sensor & Weatherproof Enc.


VendingMiser VM160 with weatherproof PIR Occupancy Sensor and weatherproof controller housing.  Wall-mounted for outdoor use.  Use in locations where vending placements are not subject to change.  Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.

Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 Outdoor Occupancy Sensor
1 Weatherproof Enclosure with screws







VendingMiser® VM161


VendingMiser® VM161 Outdoor Wall Mount With
10' Repeater Cable, and Weatherproof Enclosure


VendingMiser VM161 Controller with internal Sensor Repeater and weatherproof controller housing.  Wall mount for outdoor use.  Use as secondary unit to the VM160.  Includes 10' data cable to connect to primary VendingMiser.  Up to three VM161 units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.


Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 10' Repeater Cable
1 Weatherproof Enclosure with screws









VendingMiser® VM170

VendingMiser® VM170 Indoor 
EZ Mount Z-Bracket w/ Occupancy Sensor


VendingMiser VM170 with PIR Occupancy Sensor.  EZ Mount Z-Bracket for indoor use attaches directly to a vending machine with industrial strength Velcro.  Installs quickly and allows VendingMiser to move with machine.  Use in locations where machine placements are subject to change or if wall mounting is not desired.

Parts Included:
1 VM170 assembled and ready for installation








VendingMiser® VM171

VendingMiser® VM171 Indoor 
EZ Mount L-Bracket w/ 10' Repeater Cable


VendingMiser VM171 Controller with internal Sensor Repeater for indoor use.  Use as secondary unit with a VendingMiser VM170.  Includes a 10' repeater cable to connect to a VM150 or VM170.  Up to three VM171 secondary units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.

Parts Included:
1 VM171 ready for installation
1 10' Repeater Cable









VendingMiser® VM180

VendingMiser VM180 with weatherproof PIR Occupancy Sensor and weatherproof controller housing.  EZ Mount Z-Bracket for outdoor use attaches directly to a vending machine with industrial strength Velcro.  Installs quickly and allows VendingMiser to move with machine.  Use in outdoor locations where vending placements are subject to change or if wall mounting is not desired.

Parts Included:
1 VM180 ready for installation








VendingMiser® VM181

VendingMiser® VM181 Outdoor EZ Mount L-Bracket 
w/ 10' Repeater Cable and Weatherproof Enclosure


VendingMiser VM181 Controller with internal Sensor Repeater and weatherproof controller housing.  For outdoor use.  Use as secondary unit to the VM180.  Includes a 10' repeater cable to connect to a primary VendingMiser.  Up to three VM181 units can be connected to primary VendingMiser for a total of four units controlled by one sensor.


Parts Included:
1 CM181 ready for installation
1 10' Repeater Cable








VM2iQ - Internal VendingMiser

VM2iQ - Internal VendingMiser

The VM2iQ is a VendingMiser for mounting internally.  
Access into the machine is required for installation.

   
   Bookmark this Page   ·   Links   ·  
Privacy   ·   Terms and Conditions                   Copyright © 2007 Green Planet Company