With CoolerMiser™
you can achieve maximum energy savings, resulting in a
reduction in both operating
costs and greenhouse gas emissions. Its energy-saving
technology is incorporated into a small plug-and-play
powerhouse that installs in minutes. Compatible with all
glass-front coolers that contain non-perishable goods,
CoolerMiser's Passive Infrared Sensor (PIR) powers down the
machine when the surrounding area is vacant.
CoolerMiser™ can save an average of $100 per year, per
cooler in energy costs. In addition, one CoolerMiser™
reduces greenhouse gas emissions by 1,600 lbs of CO2 and
2,740 grams of NOx each year*.
* Based on
occupancy and the Energy Information Administration's
national average of greenhouse gas emissions and electricity
generation.
View
Brochure
View
BrochureCM2
How
It Works
|
|
CoolerMiser™
CM150
|
CoolerMiser™ CM150 Indoor Wall Mount w/ Occupancy Sensor
CoolerMiser CM150 with PIR Occupancy Sensor. Wall-mounted
for indoor use. Use in locations where cooler placements
are not subject
to change. Separate sensor assembly provides flexibility
in placement
to achieve best occupancy detection.
CoolerMiser controls glass-front coolers that contain
non-perishable goods. Machines suitable for control by
CoolerMiser typically have
glass sliding doors or pull-open doors.
Parts
Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
|
|
|
|
|
|
CoolerMiser™
CM151 |
CoolerMiser™ CM151 Indoor Wall Mount w/ 10' Repeater
Cable
CoolerMiser CM151 Controller with internal Sensor Repeater.
Wall
mount for indoor use. Use as secondary unit with a
CoolerMiser CM150. Includes a 10' repeater cable to
connect to a CM150. Up to three CM151 units can be
connected to a CM150 for a total of four units controlled by
one sensor.
CoolerMiser controls glass-front coolers that contain
non-perishable goods. Machines suitable for control by
CoolerMiser typically have
glass sliding doors or pull-open doors.
Parts
Included:
1 CoolerMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable |
|
|
|
|
|
CoolerMiser™
CM170 |
CoolerMiser™
CM170 Indoor
EZ Mount Z-Bracket w/ Occupancy Sensor
EZ Install CoolerMiser CM170 with PIR Occupancy Sensor. EZ
Mount Z-Bracket for indoor use attaches directly to cooler with
industrial strength velcro. Installs quickly and allows
the CoolerMiser controller and occupancy sensor to move with
machine. Use in locations where cooler placements are
subject to change or if wall mounting is not desired.
CoolerMiser controls glass-front coolers that contain
non-perishable goods. Machines suitable for control by
CoolerMiser typically have
glass sliding doors or pull-open doors.
Parts
Included:
1 CM170 assembled and ready for installation
|
|
|
|
|
|
CoolerMiser™
CM171
|
CoolerMiser™
CM171 Indoor
EZ Mount L-Bracket w/ 10' Repeater Cable
CoolerMiser CM171 Controller with internal Sensor Repeater for
indoor use. Use as secondary unit with a CoolerMiser
CM170. Includes a 10' repeater cable to connect to a CM150
or CM170. Up to three CM171 secondary units can be
connected to a primary CoolerMiser for a total
of four units controlled by one sensor.
CoolerMiser controls glass-front coolers that contain
non-perishable goods. Machines suitable for control by
CoolerMiser typically have
glass sliding doors or pull-open doors.
Parts Included:
1 CM171 ready for installation
EZ Mount L-Bracket
1 10' Repeater Cable
|
|
|
|
|
|
CM2iQ - Internal
CoolerMiser
|
CM2iQ
- Internal CoolerMiser
The CM2iQ is a CoolerMiser that is mounted inside a cooler.
Access into the machine is required for installation.
|
|
|
|
|
|
|
|
|
|
|
|